
How to Install
Banana

What you'll need
2x brass angled nails & a hammer
You'll find 2x brass angled nails in the box with your piece

Step One
Place a strip of masking tape at the back of the piece and mark the two spots where the nails will go.

Step Two
Take the masking tape off the piece and stick onto the wall at your desired angle and hammer in the top nail.
Hammer nail all the way in so the brass disc sits flush against the wall.

Step Three
Hammer in the second nail.

Step Four
Remove the masking tape.

Step Five
Hang the piece on the top and bottom hooks and your installation is complete!